Gpsm Leds And Components - HP Integrity Superdome 2 16-socket Service Manual

Item
1
Solid green = Link OK, transmitting at full bandwidth. Alternating green/yellow = Link in service, safe to remove. Flashing
yellow = Deconfigured link, safe to remove.
CAUTION:
Superdome 2 crossbar fabric cable. The stop link will allow safe servicing and set the LED endpoints
for easy location.
After servicing, the HR start link command will enable re-use of the link.

GPSM LEDs and components

Item
1
2
3
4
5
6
7
8
9
10
1 1
12
60 Troubleshooting
Name
Always use the HR user interface stop link command before disconnecting the
Name
Door display power connector
UID LED
Health LED
CAMNet port 1
CAMNet port 2
CAMNet port 3
CAMNet port 4
CAMNet port 5
CAMNet port 6
CAMNet port 7
CAMNet port 8
Local Clock Distribution LED
Description
Off = Ok
Flashing red = Deconfigured
Description
Blue = UID on
Flashing yellow = Degraded, indicted
Off = Ok
Flashing red = Deconfigured
Link and Activity LEDs detailed below.
Link and Activity LEDs detailed below.
Link and Activity LEDs detailed below.
Link and Activity LEDs detailed below.
Link and Activity LEDs detailed below.
Link and Activity LEDs detailed below.
Link and Activity LEDs detailed below.
Link and Activity LEDs detailed below.
Indicates the status of the global clock
signal distributed to blades in the
enclosure.
Green = OK