Operating System Specific Default Values For Npartition Attributes - HP Integrity Superdome 2 16-socket Administrator's Manual

ILM granule size at next boot
SLM granule size
SLM granule size at next boot
Max number of ILM granules possible
Max number of SLM granules possible
User Specified Max number of blades
Max number of blades at next boot
User Specified Max number of vpars
Max number of vpars at next boot
Current boot mode
Next boot mode
Parspec Change Policy
VGA
VGA next boot mode
Pending Deletion
parstatus -C
[Blade]
Enclosure/
Blade
===
1/5
1/7
* D-Degraded
NOTE: On SD2, for an nPar in npar mode, nPars are created with a default ILM/SLM distribution
of 1:7 when no value is specified for SLM. For an nPar created in vpar mode, the default is to use
100% ILM.

Operating system specific default values for nPartition attributes

When an nPartition is created for a specific operating system type, the default values specific to
that operating system type are applied to the nPartition attributes. By default, hyperthreading is
enabled when nPartitions are created to run HP-UX. The default attribute values are applied without
a need for user intervention. The partition management software applies pre-determined OS specific
defaults when you create a partition for a specific operating system type. However, there is also
support for a new pardefault command, which displays the operating system specific attribute
values and allows users to change them if needed:
pardefault
[Original Defaults]
Parcon Default OS Type
OS Type
Hyper Threading at activation
SLM Percentage
ILM granule size
SLM granule size
VGA
[Current Defaults]
Parcon Default OS Type
OS Type
Hyper Threading at activation
SLM Percentage
Usage/
Status*
===================
InActive Base/OK
Inactive Base/OK
I-Indicted
: 1024 MB
: 1024 MB
: 1024 MB
: 1024
: 1024
: 8
: 8
: 16
: 16
: npars
: npars
: Enabled
: Enabled
: Enabled
: -
CPU Memory (GB)
OK/ (GB)
Indicted/ OK/
Deconf Indicted/
Max Deconf
======= ============= ====== ====== ==========
8/0/0/8 16.0/0.0/0.0
8/0/0/8 16.0/0.0/0.0
: HPUX_11iV3
: HPUX_11iV3
: Enabled
: 87.50%
: 1024 MB
: 1024 MB
: Enabled
: HPUX_11iV3
: HPUX_11iV3
: Enabled
: 87.50%
Operating system specific default values for nPartition attributes
Use Par Pending
On Num Deletion
Next
Boot
yes 2 -
yes 2 -
25