A Partition Commands - HP Integrity Superdome 2 16-socket Administrator's Manual

A Partition commands

This appendix contains a summary of the Partition commands and descriptions of their use.
Table 13 Partition Commands Descriptions
Command
parcreate
pardefault
parmodify
parperm
parremove
parstatus
vparcreate
vparboot
vparmodify
vparreset
vparremove
vparstatus
For more information on the Partition commands, see
hpux-clickable-manpages.
Description
Creates a new nPartition.
Displays or changes default values of certain nPartition attributes.
Modifies an existing nPartition.
Configure partition configuration privilege for nPartitions and vPars.
NOTE: This command is available only from the OA.
Removes an existing nPartition.
Displays nPartition information and hardware details for a server complex.
Creates a new Virtual Partition.
Boots a Virtual Partition.
Renames or modifies the resources of a Virtual Partition.
Resets a Virtual Partition.
Removes an existing Virtual Partition.
Displays information about one or more Virtual Partitions.
http://www.hp.com/go/
107