Superdome 2 Cpu / Cpu Module Support - HP Integrity Superdome 2 16-socket Administrator's Manual

Figure 6 Partition Rules — 8s
NOTE: The loading rules for the SD2-8S are very similar to those for the SD2- 1 6s except that no
partitions larger than 4 blades are supported. This is a firmware limitation imposed on the SD2-8s.
However, as seen from the loading options, all 8 blade slots can be populated in a SD2-8s. So
you can have eight 1-blade partitions, four 2-blade partitions, two 4-blade partitions, or other
combinations when a single partition is not larger than 4 blades.
P – Preferred slotting
For example, the best 4-blade partition uses slots 1, 3, 5, and 7.
A – Alternative slotting
For example, the alternative 4-blade partition uses slots 1, 2, 3, and 4.
S – nPartition size

Superdome 2 CPU / CPU module support

HP Superdome 2 servers support the Itanium processor 9300 series.
processors and their core and I/O frequencies that are supported by HP Superdome 2.
Two different Itanium processor 9300 series CPU frequency/cache bins are supported in all HP
Superdome 2 systems (SD2-8s, SD2- 1 6s ). Support for the various speed bins is as follows:
Table 4 Processors supported on HP Superdome 2
Itanium Processor
Family
9350, 185W
9340, 185W
34 Planning nPartitions
Core Frequency
1.73GHz base/ 1.86GHz
boost
1.60GHz base/ 1.73GHz
boost
I/O Frequency
QPI: 4.8 GT/s SMI: 4.8/s
QPI 4.8 GT/s SMI: 4.8
GT/s
Table 4 (page 34) lists the
Number of Number of
Cache cores threads/core
24MB 4 1-2
20MB 4 1-2