Bundle Names; Vpars Product Bundles; Ignite-Ux Cookbook; Removing The Vpars Product - HP Integrity Superdome 2 16-socket Administrator's Manual

Superdome 2 partitioning administrator guide
Hide thumbs Also See for Integrity Superdome 2 16-socket:
Table of Contents

Advertisement

6.
Installing a vPar is similar to installing an nPar. For the next steps on vPars product installation
on HP-UX, see the HP-UX Installation and Update Guide at:
http://www.hp.com/go/hpux-core-docs.
7.
To disconnect the DVD drive, use the set partition dvd disconnect npar:vpar
command.
IMPORTANT:
For information on using the vPars commands, see the following sections:
"Managing: Creating a Virtual Partition" (page 93)
"Booting a Virtual Partition" (page 93)

Bundle Names

You can install vPars on an existing HP-UX installation directly from a depot, DVD, or from an
Ignite-UX server.

vPars Product Bundles

The vPars bundle name is T1335DC, vPars A.05.07 for HP-UX 1 1i v3.
NOTE:
For information on versions, including vPars version, OS versions, and other product
versions required to run with vPars, see the document HP-UX Virtual Partitions Ordering and
Configuration Guide available at:
www.hp.com/go/hpux-vpars-docs

Ignite-UX Cookbook

For information on how to install an Ignite-UX server, install HP-UX using Ignite-UX, and recover
clients from media or over the network, see the
nl
Ignite-UX Administration Guide at http://www.hp.com/go/hpux-core-docs.

Removing the vPars Product

To remove the vPars product, run the swremove command from the target virtual partition. For
example, to remove the vPars product from the partition winona3:
winona3# /usr/sbin/swremove -x autoreboot=true VirtualPartition
The product is removed.
IMPORTANT:
the vPars product at the bundle level (T1335DC). Recommended kernel patches are included in
the vPars bundle; if the bundle is removed, the kernel patches will also be removed.
nl
For more information on bundles and patches, see the Patch Management Guide for HP-UX 1 1.x
at http://docs.hp.com.
This is a mandatory step to enable the DVD drive for future installations.
Remove the vPars product only at the product level (VirtualPartition). Do not remove
Bundle Names 103

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents