Power Plug Configuration; C20 Male Receptacle (At Power Supply); C19 Female Plug (On One End Of The Power Cord); Unterminated Plug - HP 9000 rp3410 Manual

• Equipment cable routing
• Doors

Power Plug Configuration

Several power cables are designed for use with HP products. The region the product ships to
will determine which power cable ships with the product.
provide an overview of the power plug configurations available.
NOTE:
The following list is not meant to be all-inclusive nor is this list meant to imply every
plug shown is one that is available for the product.
Female End of Power Cable
The female end of the HP product is a C19 plug that connects the C20 receptacle in each power
supply installed in the HP product.
Figure 1-2 C20 Male Receptacle (at Power Supply)
Figure 1-3 C19 Female Plug (on One End of the Power Cord)
Male End of Power Cable
The male plug on the other end of the power cable will vary depending on the region the HP
product ships.
Figure 1-4 Unterminated Plug
Figure 1-2 to Figure 1-11 (page 31)
Power Plug Configuration 29