HP 6125XLG Configuration Manual page 120

Blade switch high availability configuration guide
Table of Contents

Advertisement

[SwitchD] track 1 nqa entry admin test reaction 1
Verifying the configuration
# Display information about the track entry on Switch A.
[SwitchA] display track all
Track ID: 1
State: Positive
Duration: 0 days 0 hours 0 minutes 32 seconds
Notification delay: Positive 0, Negative 0 (in seconds)
Tracked object:
NQA entry: admin test
Reaction: 1
# Display the routing table of Switch A.
[SwitchA] display ip routing-table
Routing Tables: Public
Destinations : 10
Destination/Mask
10.1.1.0/24
10.1.1.1/32
10.2.1.0/24
10.3.1.0/24
10.3.1.1/32
20.1.1.0/24
20.1.1.1/32
30.1.1.0/24
127.0.0.0/8
127.0.0.1/32
The output shows the NQA test result: the master route is available (the status of the track entry is Positive),
and Switch A forwards packets to 30.1.1.0/24 through Switch B.
# Remove the IP address of interface VLAN-interface 2 on Switch B.
<SwitchB> system-view
[SwitchB] interface vlan-interface 2
[SwitchB-Vlan-interface2] undo ip address
# Display information about the track entry on Switch A.
[SwitchA] display track all
Track ID: 1
State: Negative
Duration: 0 days 0 hours 0 minutes 32 seconds
Notification delay: Positive 0, Negative 0 (in seconds)
Tracked object:
NQA entry: admin test
Reaction: 1
# Display the routing table of Switch A.
[SwitchA] display ip routing-table
Routing Tables: Public
Destinations : 10
Routes : 10
Proto
Pre
Cost
Direct 0
0
Direct 0
0
Static 60
0
Direct 0
0
Direct 0
0
Direct 0
0
Direct 0
0
Static 60
0
Direct 0
0
Direct 0
0
Routes : 10
115
NextHop
Interface
10.1.1.1
Vlan2
127.0.0.1
InLoop0
10.1.1.2
Vlan2
10.3.1.1
Vlan3
127.0.0.1
InLoop0
20.1.1.1
Vlan6
127.0.0.1
InLoop0
10.1.1.2
Vlan2
127.0.0.1
InLoop0
127.0.0.1
InLoop0

Advertisement

Table of Contents
loading

Table of Contents