HP 6125XLG Configuration Manual page 28

[DeviceB] cfd md MD_B level 3
[DeviceB] cfd service-instance 2 ma-id vlan-based md MD_B vlan 100
Configure Device D as you configure Device B.
# Create MD_B (level 3) on Device C, and create service instance 2 (in which the MA is identified
by a VLAN and serves VLAN 100).
[DeviceC] cfd md MD_B level 3
[DeviceC] cfd service-instance 2 ma-id vlan-based md MD_B vlan 100
4. Configure MEPs:
# On Device A, configure a MEP list in service instance 1; create inward-facing MEP 1001 in
service instance 1 on Ten-GigabitEthernet 1/1/5.
[DeviceA] cfd meplist 1001 4002 5001 service-instance 1
[DeviceA] interface ten-gigabitethernet 1/1/5
[DeviceA-Ten-GigabitEthernet1/1/5] cfd mep 1001 service-instance 1 inbound
[DeviceA-Ten-GigabitEthernet1/1/5] quit
# On Device B, configure a MEP list in service instances 1 and 2; create outward-facing MEP
2001 in service instance 2 on Ten-GigabitEthernet 1/1/7.
[DeviceB] cfd meplist 1001 4002 5001 service-instance 1
[DeviceB] cfd meplist 2001 4001 service-instance 2
[DeviceB] interface ten-gigabitethernet 1/1/7
[DeviceB-Ten-GigabitEthernet1/1/7] cfd mep 2001 service-instance 2 outbound
[DeviceB-Ten-GigabitEthernet1/1/7] quit
# On Device D, configure a MEP list in service instances 1 and 2, create outward-facing MEP
4001 in service instance 2 on Ten-GigabitEthernet 1/1/5, and then create inward-facing MEP
4002 in service instance 1 on Ten-GigabitEthernet 1/1/7.
[DeviceD] cfd meplist 1001 4002 5001 service-instance 1
[DeviceD] cfd meplist 2001 4001 service-instance 2
[DeviceD] interface ten-gigabitethernet 1/1/5
[DeviceD-Ten-GigabitEthernet1/1/5] cfd mep 4001 service-instance 2 outbound
[DeviceD-Ten-GigabitEthernet1/1/5] quit
[DeviceD] interface ten-gigabitethernet 1/1/7
[DeviceD-Ten-GigabitEthernet1/1/7] cfd mep 4002 service-instance 1 inbound
[DeviceD-Ten-GigabitEthernet1/1/7] quit
# On Device E, configure a MEP list in service instance 1; create inward-facing MEP 5001 in
service instance 1 on Ten-GigabitEthernet 1/1/8.
[DeviceE] cfd meplist 1001 4002 5001 service-instance 1
[DeviceE] interface ten-gigabitethernet 1/1/8
[DeviceE-Ten-GigabitEthernet1/1/8] cfd mep 5001 service-instance 1 inbound
[DeviceE-Ten-GigabitEthernet1/1/8] quit
5. Configure MIPs:
# Configure the MIP generation rule in service instance 1 on Device B as explicit.
[DeviceB] cfd mip-rule explicit service-instance 1
# Configure the MIP generation rule in service instance 2 on Device C as default.
[DeviceC] cfd mip-rule default service-instance 2
6. Configure CC:
# On Device A, enable the sending of CCM frames for MEP 1001 in service instance 1 on
Ten-GigabitEthernet 1/1/5.
23