Controls, Indicators, And Features; Battery Backup - Control Center - GE 45129 User Manual

Front
Alarm
Siren
1 2
Zone
Zone
Indicators
Control, Indicators, and Features:
Zone Indicators
These LEDs indicate Sensor status for each of the
4 Zones in the Choice Alert system.
Armed and Power Indicators
These LEDs indicate status of the system.
Keypad Operations:
Arm button - Use this button on the keypad to select
the arm setting (HOME or AWAY) you wish to use.
Input DC  V - AC adapter input jack.
Mute Button - Used to mute a triggered Zone. (See pg 7)
1 2 3 4
3 4
Antenna
Keypad
Arm
Armed Power
Armed Power
Indicators
Learn Button - Used to link Sensors and Accessories to
the main unit. (See pg 10)
Features
Battery Back-up (Control Center)
The Control Center offers battery backup; up to 48
hours, in case of power failure. While the system
will operate correctly without batteries, it is highly
recommended to install four (4) new "AAA" Alkaline
batteries. To install batteries, unplug the AC adapter
from the Control Center and rotate the unit bottom side
up, revealing the battery compartment on the base.
Slide the battery compartment cover off in the direction
5
Side
Input DC 12V
Input DC 12V
-
+
Mute
Mute
Learn
Learn
Alert
Alert
Chime
Chime
Off
Off
Notification
Switch