Tare Table And General Unit Weight Setting (Submode 26) - TEC MA-1595-1 Series Owner's Manual

6. PROGRAMMING OPERATIONS
Example) Toset the following Link-PLU Table and its Sub-link PLU:
Link-PLU Table No.
1
Key Operation: Mode Lock: SET, Enter 25 and depress the [X] key.
1 [ST]
101301 [PLU]
[AT/TL]
NOTE: In this example, Link-PLU Table No. has already been set in
PLU 90601 (Drink Small-A) and PLU 90701 (Drink Small-B)
as Head-link items in the PLU PROGRAMMING operation,
Submode 4. The Sub-link PLU 101301 here has been
programmed as a bottle-deposit PLU (Small-Btl Depo) in the
same submode.
Deletion of Link-PLU Tables
CONDITION
OPERATION
25 [X]
6.14

Tare Table and General Unit Weight Setting (Submode 26)

In the PLU TABLE PROGRAMMING operation (Submode 4), some of Scale-compulsory PLUs may be set with a
Tare Table No. The actual tare weight is set to each Tare Table here. Also, the General Unit Weight is set here
so that the Unit Weight may be effective to scale items entered through departments or PLUs without any
Individual Unit Weight designation.
CONDITION
OPERATION
• Tare Table Setting
26 [X]
• General Unit Weight Setting
26 [X]
Sub-link PLU Code
(Link-PLU Table No.)
(Sub-link PLU Code)
to complete this submode
Any time outside a sale
Mode Lock: SET
[ITEM CORR]
or
[VOID]
Repeatable for other tables to be deleted.
Any time outside a sale
Mode Lock: SET
Repeat for other tables
| Tare Table No. | [ST]
1 digit (1 to 9)
| General Unit Weight Code |
1 to 11 (NOTE 1 below)
6.14 Tare Table and General Unit Weight Setting (Submode 26)
101301
| Link-PLU Table No. | [ST]
1 to 99
* (For sequentially programming
tables, the Table No.
specification can be skipped.)
| Tare Weight | [#]
0 to 999
(Unit: 1/00 LB or gram.)
(Example: enter 13 for
0.13 LB or 13 grams.)
6-38
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
08-25-2003 MON
P25
#01 101301
[AT/TL]
[AT/TL]
EO1-11152
#0
0052 13:47TM
[AT/TL]