Read (X) And Reset (Z) Reports - TEC MA-156-1 SERIES Owner's Manual

13. Read (X) and Reset (Z) Reports

This Chapter describes the operation to take Read and Reset reports and their print
formats.
Before Taking Reports...
The Read (X) Report allows to read the totals but not clear the memory, while the
Reset (Z) Report allows to read the totals and, at the same time, clear all the
resettable totals when the report has been issued.
The symbol "X" is printed at the top right of a Read Report, while "Z" is printed on
a Reset Report to indicate the type of report. The contents of the two types of
reports are the same if both are taken at the same time.
When opening the cash drawer, be careful not to let the drawer hit any person.
OPERATION
Read (X) Report
SET
OFF
REG
X
Z
Reset (Z) Report
SET
OFF
REG
X
Z
WARNING!
Financial Read (X) Report:
AT/TL (The drawer opens.)
Cash-in-drawer Read (X) Report:
#/RA (The drawer opens.)
PLU Read (X) Report:
PLU
(The drawer opens.)
Financial Reset (Z) Report:
( )
AT/TL
Secret code if
programmed
PLU Reset (Z) Report:
)
(
PLU
Secret code if
programmed
- 36 -
EO1-11099
(The drawer opens.)
(The drawer opens.)