2-11 Other operating tasks
2-11-1 Displaying the MAC address
Use the following procedure to display the MAC address of the Ethernet unit for RCX series robot
controllers.
1) Press
(PARAM) in "SYSTEM" mode to enter "SYSTEM>PARAM" mode.
F1
2) Press
(OP. BRD).
F5
3) Select the number for "E_Net" with the
keys and press
F1
4) Select "13. MAC address" with the the
keys and press
F1
* The MAC address cannot be changed.
(SELECT).
(EDIT).
2-11 Other operating tasks
27
2