Ports - KTI Networks KGS-2401 Installation Manual

5.2.2 Ports

On the page, you can view the Port status, set up the Speed mode and enable the FDX flow control.
Status & Settings
Link
Mode
FDX Flow Control
Max Frame length
Apply
Refresh
Note:
To make the maximum frame length control works properly, FDX Flow Control of the port must
be enabled. The port link partner must also be enabled for supporting flow control.
Functions
To show the status of each port. When it is red, it means the connection is
down. Otherwise, it is green.
Choose the Speed mode of port 10/100/1000, Half/Full. To disable the port,
choose Disable. If you set to auto speed, it will be auto-negotiation.
To Enable the FDX Flow control, click the check box.
To adjust the Frame length, enter the value you need. The larger value it is,
the better network performance you will have. Default is 1518. The
Maximum value is 9600.
Click this button to save the configuration.
Click this button to refresh the latest status of ports.
-17-