QMS CrownCopy User Manual page 78

d Copier/Contrast menu
This option can either increase or decrease the difference
between the light and dark areas of an image. See chapter 2,
"CrownCopy Settings" of this manual for more information on
this option.
e Copier/Color Balance menu
Use this setting when a printed image seems to have an
undesirable coloring effect in a shaded area. See chapter 2,
"CrownCopy Settings," of this manual for more information on
this option.
f Administration/Engine/Def Resolution menu
Check that the default resolution for the printer is 600 dpi
when using CrownCopy. See you magicolor CX/LX printer
documentation for information on RAM requirements for dif-
ferent resolutions, page sizes, and numbers of colors.
2 What other settings on the printer have an effect on the
scanned image quality?
a Print Density
See "About Print Density" on page 2 for details on how to
adjust the print density. Be careful and check the print density
adjustments frequently, especially after the first 300 prints to
make sure the density settings are stable.
b Printer Maintenance
Remember a printer in good repair prints better quality
images. So it's important to replace the OPC belt and to keep
the internal parts of the printer clean. See your printer docu-
mentation for instructions.
c Paper Quality
Images copy better on paper that is specifically recom-
mended for your printer. See your printer documentation for
information on the recommended print media types and
weights.