QMS CrownCopy User Manual page 35

Menu Copier/Copy Mode/Custom Config/Scan Resolution
Purpose Use this menu to specify what resolution the scanner
should use.
Choices 100, 150, 200, 300
100—Sets the scan resolution to 100 dpi.
150—Sets the scan resolution to 150 dpi.
200—Sets the scan resolution to 200 dpi.
300—Sets the scan resolution to 300 dpi.
Choose a scan resolution that is at least half of the
printer resolution being used. The higher the scan
resolution, the more detailed the copy output (as long as
the printer resolution being used is double the scan
resolution). Also, a higher scan resolution increases
copying time, because of the increased amount of data
that must be scanned and sent to the printer for
processing. (Each time scan resolution is doubled, the
amount of information that is scanned and printed is
quadrupled.)
Default 200 dpi
Note In order to change the default scan resolution, you must
choose the Custom option in the Copier/Copy Mode/
Select Mode menu.