QMS CrownCopy User Manual page 16

7 Attach the other end of the SCSI cable to the printer.
Different versions of the magicolor printer have different interface
panels.
magicolor LX
On the
magicolor LX
printer, the SCSI
port may be cov-
ered by a protec-
tive plate that
needs to be
removed.
» Note: Don't attach
the scanner to the
serial port, which
looks just like the
SCSI port.
8 Use the appropriate power cord to attach the scanner to a
power source.
9 Turn on the scanner, wait 5 seconds, and then turn on the
printer.
» Note: If you connect the scanner (to the printer) and turn it on
and wait either less than 3 or more than 20 seconds before
turning on the printer, then after the printer system software is
updated a NOT CONNECTED RECONNECT? error message
displays on the printer control panel. Press the Copy/Select key,
select Yes, and the scanner will be automatically reconnected.
SCSI Port
magicolor CX
On the magicolor
CX printer, the
SCSI port is at the
bottom of the inter-
face panel.
SCSI Port
Serial Port
» Note: Do
not attach
the scanner
here.