QMS CrownCopy User Manual page 12

If you purchased the complete CrownCopy option, the scanner kit
and the software option kit come in the same box. If you purchased
the scanner separately, then the software option kit comes in a sepa-
rate box.
» Note: The CrownCopy option supports version 1.5 of the UMAX Vista
S6E scanner. The version number is on the back of the scanner box.
The scanner kit contains the following:
n
Scanner
n
Power cords (Both 110- and 220-volt cords are supplied. 100-volt
cords are supplied in Japan only)
n
SCSI terminator and SCSI cable
You also received additional items that allow you the flexibility to use
CrownCopy as a scanner attached to a computer (but are not
required to use CrownCopy as a copier):
n
Scanning software
n
Calibration software
n
SCSI interface daughterboard
See the documentation accompanying these items for information on
setting up CrownCopy to scan images to a host computer.
Note: CrownCopy cannot be connected to both a printer and a
»
computer at the same time. It can be connected either to the printer or
to a host computer.
The CrownCopy software option kit contains this manual and
the following:
n
Warranty card
n
Registration card
n
magicolor LX envelope containing CrownCopy software (on
disks) for the QMS magicolor LX printer, a Select/Copy key
overlay, and a PROM