Table of Contents
Advertisement
Edges of the copy
are cut off
Image quality of
copies is not optimal
n
Make sure you're centering documents at the
top of the scanner glass and that the scan
size setting ("Scan Size" on page 12) is cor-
rect. Also, keep in mind that the printer's
maximum imageable area is 8.11" x 10.61"
for letter-size media and 200 mm x 287 mm
for A4.
n
Clean the scanner glass: dampen a lint-free
cloth with alcohol or a mild detergent and
wipe the glass clean.
n
If you're copying transparencies, you should
purchase the optional transparency adapter,
and make sure you've enabled the
Transparency option in the printer's control
panel.
n
If you're scanning at 150 dpi, some printed
materials, such as magazines, cause moiré
patterns. To remove these patterns, change
the scan resolution to 200 or 300 dpi (choose
Copier/Copy Mode/Select Mode/Custom and
then Copier/Copy Mode/Custom Config/
Scan Resolution/200 or 300).
n
If copy colors are dramatically different from
the colors in the original document, see
chapter 4, "Copy Quality," for information on
adjusting the appearance of copies.
n
Check the printer user's guide for additional
troubleshooting tips for improving printout
quality.
Advertisement
Table of Contents
