QMS CrownCopy User Manual page 31

Default 1
Notes Each digit can be set individually: use the Select or
Menu key to move the cursor to the digit you want to
change, and then use the Next key to increase it or use
the Previous key to decrease it. Once the number you
want is set, press the Select key to save it.
The number of copies is reset to 1 each time
CrownCopy is used. When you're printing multiple
copies, subsequent copies are printed faster than the
first copy.
Menu Copier/Contrast
Purpose Use this option to adjust contrast in copies.
Choices 15 contrast settings; each makes an incremental
contrast change of about 2%
D—Moving the setting in this direction increases
contrast. It makes light areas appear lighter and dark
areas appear darker.
L—Moving the setting in this direction decreases
contrast by making dark areas appear lighter and light
areas appear darker.
Default The middle setting
Notes Use the Previous key to move the message-window
cursor from the center towards the left to a darker
(higher contrast) setting or use the Next key to move the
cursor towards the right to a lighter (lower contrast)
setting.
Each increment of change in the contrast setting is
significant in output quality. Therefore, we recommend
that you change the setting by only one level, print out a
test copy, and then determine if further modification to
the contrast setting is necessary.
See chapter 4, "Copy Quality" for more information on
these options.