Table of Contents
Advertisement
Assembly Instructions
Caution: While it is possible for one person to
assemble this grill, obtain assistance from another
person when handling some of the larger, heavier
pieces.
1. Open lid of shipping carton and remove top
sheet of cardboard. Lay cardboard sheet on floor
and use as a work surface to protect floor and grill
parts from scratches.
2. Remove packing materials from shipping carton.
3. You may slice the carton front corners with a
utility knife to lay open the carton front panel. This
will allow you to raise the grill head lid and remove
the components packed inside the head.
4. Use the parts list to check that all parts have
been included.
5. Inspect the grill for damage as you assemble it.
Do not assemble or operate the grill if it appears
damaged. If there are damaged or missing parts
when you unpack the shipping box, or you have
questions during the assembly process, call:
1-800-469-4663
8am – 5pm EST, Monday through Friday.
Installing Side Shelves
1. Attach side condiment holder to left side shelf
by using ¼" x 15mm Philips head screws.
(Fig.1)
(Fig.1)
2. Attach side control panel to side burner shelf by
using ¼" x 15mm Philips head screws.
(Fig.2)
3. Attach side shelves to both sides of grill by
using ¼" x 15mm Philips head screws.
(Fig.3)
4. Secure condiment holder to the left of main
control panel by using ¼" x 10mm Philips
head screw. Secure side control panel to the
right of main control panel by using ¼" x
10mm Philips head screw. (Fig.4)
400
500
600
300
70 0
200
800
100
P7
Figure 1
Figure 2
Figure 3
Figure 4
Advertisement
Table of Contents
