Kenmore 650-30643-0 Owner's Manual page 15

Cleaning and Maintenance
Regardless of which burner cleaning procedure
you use, we recommend you also complete the
following steps to help prolong burner life.
1. Use a fiber pad or nylon brush to clean the
entire outer surface of each burner until free of
food residue and dirt.
2. Clean any clogged ports with a stiff wire, such
as an open paper clip.
3. Inspect each burner for damage (cracks or
holes) and if such damage is found, order and
install a new burner. After installation check to
ensure that gas valve orifices are correctly placed
inside the ends of the burner tubes. Also check the
position of your spark electrode.
! WARNING
The location of the burner tube with respect to
the orifice is vital for safe operation. Check to
ensure the orifice is inside the burner tube before
using the gas grill. If the burner tube does not fit
over the valve orifice, lighting the burner may
cause explosion and/or fire.
HOW TO REPLACE MAIN BURNER HOW TO REPLACE MAIN BURNER
Step 1. Locate the burner onto the orifice.
Step 2. Secure the main burner on the back wall
of fire box with 2 screws.
P14