Security - Nexcom NDiS 111 User Manual

Chapter 4: BIOS Setup

Security

Aptio Setup Utility -
(C)Copyright 2010, American Megatrends, Inc.
Main Advanced Chipset
Password Description
If ONLT the Administrator's password is set,
then this only limits access to setup and is only
asked for when entering Setup.
If ONLY the User's password is set m the this
is a power in password and must be entered to
boot or enter setup. In Setup the User will have
administrator right
Administrator Password
User Password
Version 2.10.1208. (C)Copyright 2010, American Megatrends, Inc.
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
Boot Security Save & Exit
Set Setup Administrator
Password
Select Screen
← →
Select Item
↑↓
+ - Change Field
Tab Select Field
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Change Supervisor Password
This field is used to set or change the supervisor password. To set a new
password:
1. Select the Change Supervisor Password field then press <Enter>.
2. Type your password in the dialog box then press <Enter>. You are lim-
ited to eight letters/numbers.
3. Press <Enter> to confirm the new password.
4. When the Password Installed dialog box appears, select OK.
To change the password, repeat the same steps above.
To clear the password, select Change Supervisor Password then press <Enter>.
The Password Uninstalled dialog box will appear.
Change User Password
This field is used to set or change the user password. To set a new password:
1. Select the Change User Password field then press <Enter>.
2. Type your password in the dialog box then press <Enter>. You are lim-
ited to eight letters/numbers.
3. Press <Enter> to confirm the new password.
4. When the Password Installed dialog box appears, select OK.
To change the password, repeat the same steps above.
27
NDiS 111 User Manual