Table of Contents
Advertisement
Autolamp On/Off Delay System (If equipped)
The autolamp sets the headlamps to turn on and off
automatically. You can use the autolamp to:
turn on the headlamps automatically at night
turn off the headlamps automatically during daylight
keep the headlamps on for approximately three minutes after
you turn the key to OFF
To set the autolamp:
Make sure the headlamp control knob is in the OFF position.
1.
If the knob for the headlamps is on, the autolamp system is
canceled.
Turn the ignition key to start your vehicle.
2.
Use the autolamp thumbwheel to activate the autolamp
3.
feature. It is located to the left of the instrument cluster. The
white mark indicates the approximate center of the
thumbwheel.
Controls and Features
79
Advertisement
Table of Contents
