Ford Villager Owner's Manual page 287

Hide thumbs Also See for Villager:
Table of Contents

Advertisement

Adding Engine Coolant
Engine coolant recovery reservoir
Do not put engine coolant in the container for the
windshield washer fluid.
When the engine is cool, add a 50/50 mixture of engine coolant
and water to the engine coolant recovery reservoir — DO NOT
ADD DIRECTLY TO THE RADIATOR. Add straight water only
in an emergency, but you should replace it with a 50/50
mixture of coolant and distilled water as soon as possible.
Check the coolant level in the coolant recovery reservoir the
next few times you drive the vehicle. If necessary, add enough
of a 50/50 mixture of coolant and water to bring the liquid
level to the fill line on the reservoir.
290
RWARNING

Advertisement

Table of Contents
loading

Table of Contents