Ford Villager Owner's Manual page 44

Hide thumbs Also See for Villager:
Table of Contents

Advertisement

NOTE: In some instances, the radio may have CD changer
controls, even if there is no CD changer.
The digital display on the radio shows the disc and track
number. Indicators for compression on ("COMP") and shuffle
on ("SHUFFLE") are also in the display. These features are
described in more detail later in this chapter.
Once a magazine is inserted, operation of the CD changer will
override that of the cassette player or radio.
NOTE: The volume, bass, treble, balance, and fader controls
on the radio are also used with the CD changer.
Slide the CD door all the way to the right. Insert the magazine
into the magazine opening. If a magazine is already loaded,
pressing "CD" will start CD play. For the first three seconds
after a disc starts playing, the radio display shows the disc
number (CD-01 for disc 1). From seconds four through six, the
track number is shown (TR-02 for track 2). For the remainder of
the track, the display shows the disc and track number (01-02
for disc 1, track 2).
When the disc reaches the end, the disc changer automatically
goes to the beginning of the next disc and resumes playing.
How to eject the CD magazine
Press the eject button on the lower left of the CD changer to
eject the magazine whether or not the audio system is on.
NOTE: If the ignition key is turned OFF during play and
then is set to the ON or ACCESSORY position, the
CD changer will resume playing in the mode
(radio/tape/CD) it was in when ignition was turned
off.
42

Advertisement

Table of Contents
loading

Table of Contents