Turn Signal Lever - Ford Villager Owner's Manual

START cranks the engine. Release the key once the engine starts
so that you don't damage the starter. The key should return to
the ON position when you release it.

Turn Signal Lever

You can use the turn signal lever on the left side of the steering
column to:
operate the turn signals.
turn the headlamps to high beam.
flash the headlamps.
turn the windshield wipers and washer on/off.
Turn Signals
Move the lever up to signal a right turn. Move it down to
signal a left turn. The corresponding indicator light in the
instrument cluster will flash.
The turn signal lever
If the turn signal stays on after you turn, move the lever back
to the center (off) position.
For lane changes, move the lever far enough to signal but not to
latch. The lever will return to the off position when you release
it.
Controls and Features
87