Ford Villager Owner's Manual page 39

NOTE: Illuminated bars in the display show relative levels of
bass and treble, and positions of speaker balance and
fader functions (left to right, front to rear).
Cassette Tape Player Operation
How to insert a tape
Your cassette tape player is equipped with power loading. Once
you insert a tape and push slightly (with the open edge to the
right), the loading mechanism draws the tape the rest of the
way in and play will begin after a momentary tape tightening
process.
How to locate a desired selection on the tape
There are four ways to locate a desired selection on the tape.
You can use the fast forward, rewind, "SEEK" or "SCAN"
function. Following are brief descriptions of each.
Fast forwarding the tape
1.
To fast forward the tape, press the "FF" button. The " X "
display blinks while the tape fast forwards. The radio will
automatically begin playing until fast forward is manually
stopped (by pressing "FF" button) or the end of the tape is
reached. At the end of the tape, the direction automatically
reverses and plays the other side of the tape.
Rewinding the tape
2.
To rewind the tape, press the "REW" button. The " X "
display blinks while the tape rewinds. The radio will
automatically begin playing until rewind is manually
stopped (by pushing the "REW" button) or the beginning of
the tape is reached.
Electronic Sound Systems
37