Ford Villager Owner's Manual page 160

Using the Automatic Locking Mode
Retractor to Secure a Child Safety Seat
Your vehicle is equipped with a dual locking mode retractor on
the shoulder belt portion of the combination lap/shoulder safety
belt for the front passenger seat and rear outer seats. The
automatic locking mode must be used when installing a child
seat or infant carrier in the front passenger seat or rear outer
seats.
To install a child safety seat or infant carrier, follow these steps:
Position the child seat or infant carrier in the vehicle seat. If
1.
you are using the moveable third row seat in the third row
position, the passenger side second row bucket seat, or the
front passenger seat, slide the seat to the rearmost position.
Follow the child seat or infant carrier manufacturer's
2.
instructions. Route the safety belt through the child seat or
infant carrier and insert the safety belt tongue into the
buckle until you hear and feel the latch engage. Be sure to
follow the child safety seat manufacturer's instructions for
belt routing.
Seating and Safety Restraints
159