Technical Specifications - HP ProLiant BL685c Specification

QuickSpecs

Technical Specifications

System Unit Dimensions
(H x W x D)
Weight
(approximate)
Power Specifications
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
DA - 13655 Worldwide — Version 36 — December 13, 2013
HP ProLiant BL685c Generation 7 (G7) Server Blade
14.42 x 2.19 x 20.058 (36.63 x 5.56 x 50.95 cm)
Maximum
(all hard drives, DIMMs, and
processors installed)
Minimum
(no hard drives, two
processors and four
DIMMs)
For power specifications including input requirements, BTU rating, and power
supply output, please see the HP BladeSystem c-Class Enclosures QuickSpecs
located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
To review typical system power ratings use the HP Power Advisor which is
available via the online tool located at:
NOTE: For optimal cooling and system performance the BL685c G7 requires
the c7000 enclosure to be configured with 10 fans and the c3000 enclosure to
be configured with 6 fans.
Operating
Non-operating
Operating
Non-operating
Operating
Non-operating
27 lbs (12.25 kg)
19.2 lbs (8.71 kg)
www.hp.com/go/hppoweradvisor
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m (1.8°F
per every 1000 ft) above sea level to a maximum
of 3050 m (10,000 ft), no direct sustained
sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the
type and number of options installed. System
performance may be reduced if operating with a
fan fault or above 30°C (86°F).
-30° to 60°C (-22° to 140°F), maximum rate of
change is 20°C/hr (36°F/hr).
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-
condensing.
10 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, non-
condensing.
3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
9144 m (30,000 ft). Maximum allowable altitude
change rate is 457 m/min (1500 ft/min).
Page 41