Oce cm4520 User Manual page 127

4
2
If necessary, special dialing symbols, such as a
tone, pause or dash, can be entered. The
recipient's fax number can also be entered by
using the keypad.
– To clear the entered recipient number, touch
[Del.].
– To specify an additional recipient, touch [Next
Dest.], and then enter the number.
– To clear all of the selected destinations, press the
[Reset] key.
– To check/delete the specified destination, press
the [Mode Check] key. For details on checking/
deleting destinations, refer to "Checking the
settings (Mode Check)" on page 5-10.
– Additional destinations can be added from
programs or groups.
– [Tone]: If pulse dialing is being used, touch this
button to send a push-button tone. This is used
when a fax information service is being used. "T"
appears in the screen. If pulse dialing is being
used, use
4-12
to switch to a push-button tone.
Using fax functions
cm4520