Oce cm4520 User Manual page 125

4
2
Touch the button for the destination where the
fax is to be sent.
– The selected button appears highlighted.
– The corresponding address appears as the name
of the registered destination when an index
button is touched.
– To cancel the setting, touch the button again to
deselect it.
– To clear all of the selected destinations, press the
[Reset] key.
– To check/delete the specified destination, press
the [Mode Check] key. For details on checking/
deleting destinations, refer to "Checking the
settings (Mode Check)" on page 5-10.
– The letter at the beginning of the button name
indicates the following information registered in
the address book.
A: Abbr. Dial
E: E-Mail
B: User Box
P: IP Address Fax Destination
I: Internet Fax Address
4-10
Using fax functions
cm4520