A (Power Control) - IBM DDRS-39130 - Ultrastar 9.1 GB Hard Drive Specifications

7.9.12 Page 1A (Power Control)
7 6
BYTE 0 PS RSVD
BYTE 1
BYTE 2
BYTE 3
BYTE 4 (MSB)
|
BYTE 7
BYTE 8 (MSB)
|
BYTE 11
Figure 83. Page 1Ah
Idle bit must be set to 0.
Standby bit of one indicates that the target shall use the Standby Condition Timer to determine the
length of inactivity time to wait before entering the Standby condition. A standby bit of zero indicates
that the target shall not enter the Standby condition.
Idle Condition Timer must be 00000000h.
Standby Condition Timer field indicates the inactivity time in 100 millisecond increments that the target
shall wait before entering the Standby condition.
112
O E M Spec. of DDRS-3xxxx
BIT
5 4 3
Page Code = 01Ah
Page Length = 0Ah
Reserved = 0
Reserved = 0
Idle Condition Timer = 0
Standby Condition Timer
2 1 0
Idle Standby
(LSB)
(LSB)
Default
9Ah
0Ah
00h
00h
00h
|
00h
00h
|
00h