1.0 General
1.1 Introduction
| This document describes the specifications of the following IBM 3.5 inch SCSI drives.
|
DDRS-39130
|
SCSI-3 FAST-20 SE 50-pin
|
SCSI-3 FAST-20 SE 68-pin WIDE
|
SCSI-3 FAST-20 SE 80-pin SCA-2
|
LVD
FAST-40
|
LVD
FAST-40
|
DDRS-34560
|
SCSI-3 FAST-20 SE 50-pin
|
SCSI-3 FAST-20 SE 68-pin WIDE
|
SCSI-3 FAST-20 SE 80-pin SCA-2
|
LVD
FAST-40
|
LVD
FAST-40
Note: The specifications are subject to change without notice.
1.2 References
'draft' ANSI SCSI-2 standard, Revision 10L, Jan 1994 (Document X3.1311-1994)
'draft' ANSI SCSI-3 Fast-20, X3T10/1071D
|
'draft' ANSI Palallel Interface-2 (SPI-2), T10 Project-1142D Revision 19
'draft' ANSI SCSI-3 SCAM, X3T10/855D Annex A
Note: The interface conforms to the referred documents. The vendor specific items and options supported
by the drive are described in each section.
Copyright IBM Corp. 1997
(with SCSI terminator)
(with SCSI terminator)
68-pin WIDE
(can be used also as SCSI-3 FAST-20 SE)
80-pin SCA-2
(can be used also as SCSI-3 FAST-20 SE)
(with SCSI terminator)
(with SCSI terminator)
68-pin WIDE
(can be used also as SCSI-3 FAST-20 SE)
80-pin SCA-2
(can be used also as SCSI-3 FAST-20 SE)
1