IBM DDRS-39130 - Ultrastar 9.1 GB Hard Drive Specifications page 110

1 1 0 0 The highest level error is reported at the end of transfer.
rection are attempted.
CHECK CONDITION status and RECOVERED E R R O R Sense Key set at the
end of the transfer.
no err
soft err
hard err
1 1 0 1 The highest level error is reported at the end of transfer.
rection are attempted.
CHECK CONDITION status and RECOVERED E R R O R Sense Key set at the
end of the transfer.
no err
soft err
hard err
1 1 1 0 The highest level error is reported at the end of transfer.
ECC is not applied.
status and RECOVERED E R R O R Sense Key set at the end of the transfer.
no err
soft err
hard err
1 1 1 1 The highest level error is reported at the end of transfer.
ECC in not applied.
CHECK CONDITION status and RECOVERED E R R O R Sense Key set at the
end of the transfer.
no err
soft err
hard err
100
O E M Spec. of DDRS-3xxxx
Recovered and/or corrected data (if any) is transferred with
The transfer length is exhausted.
The transfer stops on the first soft error detected.
the sense data shall contain the LBA of the block in error.
Data transfer stops on the unrecoverable error.
CHECK CONDITION status with the appropriate Sense Key.
Recovered and/or corrected data (if any) is transferred with
The transfer length is exhausted.
The transfer stops on the first soft error detected.
the sense data shall contain the LBA of the block in error.
Data transfer stops on the unrecoverable error. The unrecoverable error
block is returned to the initiator.
CONDITION status with the appropriate Sense Key.
Recovered data is transferred with CHECK CONDITION
The transfer length is exhausted.
The transfer stops on the first soft error detected.
block is returned to the initiator.
shall contain the logical block address of the block in error.
Data transfer stops on the unrecoverable error.
CHECK CONDITION status with the appropriate Sense Key.
Recovered and/or corrected data (if any) is transferred with
The transfer length is exhausted.
The transfer stops on the first soft error detected.
the sense data shall contain the logical block address of the block in error.
Data transfer stops on the unrecoverable error. The unrecoverable error
block is returned to the initiator.
CONDITION status with the appropriate Sense Key.
Retries and error cor-
The information in
The file then creates the
Retries and error cor-
The information in
The file then creates the CHECK
Retries are attempted but
The recovered error
The information in the sense data
The file then creates the
Retries are attempted but
The information in
The file then creates the CHECK