IBM DDRS-39130 - Ultrastar 9.1 GB Hard Drive Specifications page 109

1 0 0 0 The highest level error is reported at the end of transfer.
rection are attempted.
CHECK CONDITION status and RECOVERED E R R O R Sense Key set at the
end of the transfer.
no err
soft err
hard err
1 0 0 1 The highest level error is reported at the end of transfer.
rection are attempted.
CHECK CONDITION status and RECOVERED E R R O R Sense Key set at the
end of the transfer.
no err
soft err
hard err
1 0 1 0 The highest level error is reported at the end of transfer.
ECC is not applied.
CHECK CONDITION status and RECOVERED E R R O R Sense Key set at the
end of the transfer.
no err
soft err
hard err
1 0 1 1 The highest level error is reported at the end of transfer.
ECC is not applied.
CHECK CONDITION status and RECOVERED E R R O R Sense Key set at the
end of the transfer.
no err
soft err
hard err
Recovered and/or corrected data (if any) is transferred with
The transfer length is exhausted.
The transfer length is exhausted. Transferred data includes blocks con-
taining recovered errors.
contain the logical block address of the last recovered error.
Data transfer stops when an unrecoverable error is encountered.
unrecoverable block is not transferred to the initiator.
creates the CHECK CONDITION status with the appropriate Sense
Key.
Recovered and/or corrected data (if any) is transferred with
The transfer length is exhausted.
The transfer length is exhausted. Transferred data includes blocks con-
taining recovered errors.
contain the logical block address of the last recovered error.
Data transfer stops when an unrecoverable error is encountered.
unrecoverable block is transferred to the initiator.
the CHECK CONDITION status with the appropriate Sense Key.
Recovered and/or corrected data (if any) is transferred with
The transfer length is exhausted.
The transfer length is exhausted. Transferred data includes blocks con-
taining recovered errors.
contain the LBA of the last recovered error.
Data transfer stops when an unrecoverable error is encountered.
unrecoverable block is not transferred to the initiator.
creates the CHECK CONDITION status with the appropriate Sense
Key.
Recovered and/or corrected data (if any) is transferred with
The transfer length is exhausted.
The transfer length is exhausted. Transferred data includes blocks con-
taining recovered errors.
contain the LBA of the last recovered error.
Data transfer stops when an unrecoverable error is encountered.
unrecoverable block is transferred to the initiator.
the CHECK CONDITION status with the appropriate Sense Key.
Retries and error cor-
The information byte in the sense data will
Retries and error cor-
The information byte in the sense data will
Retries are attempted but
The information byte in the sense data will
Retries are attempted but
The information byte in the sense data will
SCSI C O M M A N D SET
The
The file then
The
The file then creates
The
The file then
The
The file then creates
99