The Espresso Shot; Frothing Milk - Dualit Espress-Auto 3in1 Coffee Machine Instruction Manual & Guarantee

tHE EsPREssO sHOt

You are looking for an espresso with a 2 - 3mm crema and a rich,
dark brown colour underneath.
1 2
AttACH HOLDER CUPs
LOCK
Align the holder with the Place 1 or 2 warmed
espresso cups or a cup
open lock symbol, insert,
under the nozzles of the
then rotate 45 to the closed
0
filter holder. Make sure your
lock symbol.
cups are directly under both
nozzles.
4 5
EXtRACtION stOP EXtRACtION
the espresso will flow out of When the correct dose of coffee
has been dispensed the machine
the filter nozzles. this may
will automatically stop dispensing.
take a few seconds. Only the
selected button will remain All the auto dosing buttons will
lit. be lite when ready for the next
extraction. Unplug when not in
use.
3
sELECt AUtO DOsE
to extract your espresso,
Press the chosen auto dosing
button. (see page 6 & 25)
6
CLEAN FILtER OR
NX ADAPtOR
When using the filter holder,
knock out the grounds over a
bin. Rinse the filter under
running water to remove any
coffee grounds. Use the filter
pin to unblock the filters or
NX adapter if required.

FROtHING MILK

ImPORTANT NOTICE: After each use, wipe the steam wand & flush the
inside of the wand by dispensing water through the wand.
1 2
sELECt stEAM FROtH NOzzLE
Press the steam button. It will Put the froth nozzle on the
flash red until the end of the steam wand.
Caution: Wand may
temparature is correct for
steam, then it will turn solid be hot.
red.
5
4
stOP stEAMING
stARt stEAM
to start steaming turn the flow
to stop steaming, turn the flow
control knob slowly between control knob to the 'off'
the 'off' and the 'steam / water' position. Press any button to
position to adjust the flow of
exit the steam function. the
steam. You will hear the pump
pump will operate to reduce
operating; this is quite
the temperature to optimum
normal.
coffee temperature
3
POsItION jUG
Use 75 - 200ml of cold
semi-skimmed milk in a
stainless steel jug. Position the
head of the froth nozzle just
under the surface of the milk.
6
fLUSH AND wIPE
ImPORTANT NOTICE:
After each use, flush the steam
wand by dispensing water (see
page 14) or steam to remove
any milk residue from inside the
steam wand. Wipe the steam
wand. Unplug when not in use.