Dualit Espress-Auto 3in1 Coffee Machine Instruction Manual & Guarantee page 15

tROUBLEsHOOtING GUIDE
Problem
Coffee leaking
from the
brewhead
Water dripping
from the brewhead
when steaming
My machine is making a
loud and continuous
pumping noise
My machine has
stopped during use
The auto dosing and steam
buttons are flashing
My machine is not
working
The lights are off and the machine
ceases to operate
My machine is not
dispensing correct
amount of coffee
Possible cause(s)
1. Dried coffee on the gasket.
2. EsE pod or NX capsules not seated correctly.
3. Blocked brewhead.
4. Damaged brewhead gasket.
1. Excess water in the brewhead is left over from previous
operation
1. Water tank is not correctly seated in position.
2. Water tank is empty.
1. Water tank is empty.
1. Fuse may have failed.
1. Your cup holds a different quantity of coffee to the
preset amount.
2. the dosing memory has been used to change the dose.
28
Solution(s)
1. Clean gasket (see page 18, fig 3).
2. Check the capsule is in place. If using EsE pod, tuck the tab under (see page 11, fig 4-5).
3. Clean showerhead (see page 18, fig 3).
4. to obtain a new gasket contact the Dualit customer helpline on
+44 (0)1293 652 500 (09:00 to 17:00 Monday to Friday).
1. this is not cause for concern. this will automatically stop when the machine has
finished steaming.
1. Locate water tank (see page 8, fig 1).
2. Fill water tank (see page 8, fig 1).
1. to prevent an air lock firstly remove the filter holder. Fill water tank (see page 8, fig
1). Your machine is now ready to extract your next coffee (see page 12).
1. Check and replace the fuse.
2. Contact the Dualit customer helpline on
+44 (0)1293 652 500 (09:00 to 17:00 Monday to Friday).
1. Adjust the dose using the dosing memory feature (see page 15).
2. Use the dosing memory feature to adjust the dose to your desired amount (see
page 15).
29