Crestron Isys TPMC-12L Operation Manual page 27

Crestron TPMC-12L
Operations Guide – DOC. 6686C
Display Output
Touching Display Output shows the display resolution of the touch screen and
provides test charts for adjusting skew, peak and boost settings on a remote display.
"Display Output" Window
Select the following Test Patterns, in the following order and adjust the display as
necessary.
1. Vertical Lines
2. Grid
3. Color Bars
4. Grayscale Gradient
5. Frequency Adjust Test
6. Streak, Boost and Skew
7. Full Screen White
Update Panel
The Update Panel button permits the selection of the touch screen program, a .vtz
file. It is also used to upgrade firmware.
The Project tab of the "Project and Firmware" window is divided into two sections:
Current Loaded Project and Load New Project.
Current Loaded Project displays the name and creation time of the current project.
In the Load New Project section, touch Browse and select the compiled project (i.e.
the .vtz file) to be loaded from a network drive, USB device or flash drive, then
touch Open to show the source file in the "Project and Firmware" window. Touch
Load to uncompress the project file, place it in the destination selected in Target
Location to Load the Project to and display it on the touch screen.
In the Target Location to Load the Project to area of the Load New Project section,
you can choose the location where your uncompressed project files will be stored.
The default file location is the internal flash.
®
Isys 12" Wall Mount Touch Screen
®
12" Wall Mount Touch Screen: TPMC-12L • 23
Isys