Bosch B450 Installation & Operation Manual page 23

Conettix Plug-in Communicator
Interface
9.
10. Click Save to save the file to the target PC or laptop. Perform this task to download both
11. Supply power to the B450.
12. Connect the B450 to the target PC or laptop, using a USB Type A to A cable. A New
13. Install the RBUS1CP.inf file onto your PC or laptop. Verify through the device manager
Figure 5.5: RBUS1CP.inf installed inside Device Manager
14. Install a communication program to configure the B450.
Bosch Security Systems, Inc.
To the right of the B450, click on the language link (for example, en).
The File Download dialog box opens.
the USB driver file, and the RBUS1CP.inf file.
Hardware Found window appears on the computer.
that the appropriate .inf installs properly, and is listed under the Ports (COMM & LPT)
section. The correct .inf file is B450 Config Interface.
Installation and Operation Guide
Configuration | en 23
2013.09 | 02 | F.01U.282.875