Table of Contents
Advertisement
SCREEN SETTING
12
Use the jog dial to set T-2, and then turn the shuttle dial
clockwise.
Repeat this procedure to switch between T-1, T-2, T-3 and T-4.
13
Use the jog dial to move the cursor to 09, and then turn the
shuttle dial clockwise.
"ON" flashes.
14
Use the jog dial to set "OFF" , and then turn the shuttle dial
clockwise.
Repeat the above procedure to set cameras 10 (10) through to
16 (16) to "OFF".
Note: Repeat steps 10 to 12 to set T-3 and T-4 as required.
15
Press the EXIT/OSD button.
The display returns to the normal screen.
EXIT/OSD
English
T-1
(6 00 - 12 00)
T-3
(16 00 - 24 00)
Note:
Repeat the above procedure to make the settings for monitor 2.
For a 4-screen display, the timer function cannot be used for
automatic switching of screen images.
MASK settings
C
If you do not need camera images to be displayed on the monitor
screen, you can hide the images for individual cameras with a gray
pattern.
The DSR-3009P model can display only cameras 01 to 09.
Example 1: To prevent certain camera images from
being monitored for the period of time
set by the timer (TIMER A, B)
1
Set the timer setting for both TIMER A and TIMER B in the
TIME PERIOD SET menu. (See page 46.)
Set both TIMER A and TIMER B.
85
T-2
(12 00 - 16 00)
T-4
(24 00 - 6 00)
Advertisement
Table of Contents
