Table of Contents
Advertisement
SCREEN SETTING
9
Press the EXIT/OSD button.
The display returns to the normal screen.
EXIT/OSD
Example 3: To set a 5-second interval for the
automatic switching of main monitor
images and to prevent automatic
switching from occurring when it is not
required, such as when using the timer
function.
1
Set the timer setting for both TIMER A and TIMER B in the
TIME PERIOD SET menu. (See page 46.)
Set both TIMER A and TIMER B.
2
Use the jog dial to move the cursor to SEQUENCE, and then
turn the shuttle dial clockwise.
"1S" flashes.
3
Use the jog dial to change the SEQUENCE setting to "INDIV." ,
and then turn the shuttle dial clockwise.
The cursor moves to SEQUENCE SET.
4
Turn the shuttle dial clockwise.
The SEQUENCE SET sub-menu appears.
5
Turn the jog dial to select MAIN MONITOR, and then turn the
shuttle dial clockwise.
"1S" flashes.
6
Use the jog dial to set "5S" , and then turn the shuttle dial
clockwise.
The cursor moves to MAIN MONITOR SET.
Display examples:
1 – 30S: Sets the automatic switching time for the main
monitor.
INDIV. : Select when setting individual switching times for each
camera for the main monitor.
7
Turn the shuttle dial clockwise.
The MAIN MONITOR SET sub-menu will be displayed. This
sub-menu screen is used to select whether the images from
cameras 1 to 16 are displayed or not displayed for the time set by
the timer setting (T-1).
8
Turn the shuttle dial clockwise, use the jog dial to select
"T-1" , and then turn the shuttle dial clockwise.
The cursor moves to 01.
9
Use the jog dial to move the cursor to CAMERA 1 (01), and
then turn the shuttle dial clockwise.
"ON" flashes.
10
Use the jog dial to set "OFF" , and then turn the shuttle dial
clockwise.
Repeat the above procedure to set cameras 2 (02) through to 8
(08) to "OFF".
11
Use the jog dial to move the cursor to T-1, and then turn the
shuttle dial clockwise.
84
English
Advertisement
Table of Contents
