Table of Contents
Advertisement
B
N
S
ASIC
ETWORK
ETTINGS
4.5.11 Configuring Diagnostics
The diagnosis feature allow the administrator to verify that another device is available on the network and is accepting request pack-
ets. If the ping result returns alive, it means a device is on line. This feature does not work if the target device is behind a firewall or
has security software installed.
Target IP / Domain Name
search.
Ping Packet Size
Enter the packet size of each ping.
Number of Pings
Enter the number of times you want to ping.
Start Ping
Click Start Ping to begin pinging.
Trace route target
Enter an IP address or domain name you want to
trace.
Start Traceroute
Click Start Traceroute to begin the traceroute
operation.
Target Address
Enter the IP address of the target PC.
Time period
Enter time period for the speed test.
Check Interval
Enter the interval for the speed test.
Start Speed Test
Click Start Speed Test to begin the speed test
operation.
IPv4 Port
Displays the IPv4 port number of the ENS202.
IPv6 Port
Displays the IPv6 port number of the ENS202.
Enter the IP address you would like to
4-53
C
D
ONFIGURING
IAGNOSTICS
Advertisement
Table of Contents
