EnGenius User Guide User Manual page 20

I
NSTALLATION
5. Plug the other end of the Ethernet cable into the PoE port
of the PoE injector.
LAN
Figure 2-1: Installing the ENS202
6. Turn over the ENS202. Then insert the pole mounting
strap through the middle hole of the ENS202. Use a
screwdriver to unlock the pole-mounting ring putting it
through the ENS202.
7. Mount the ENS202 securely to the pole by locking the
strap tightly.
This completes the installation procedure.
PoE
2-3
I D
NSTALLING THE EVICE