Table of Contents
Advertisement
B
N
S
ASIC
ETWORK
ETTINGS
Secondary DNS
Enter the secondary DNS server address.
Discard Ping on WAN
Check to Enable to recognize pings on the ENS202 WAN interface or Disable to block pings on the ENS202
WAN interface. Note: Pinging IP addresses is a common method used by hackers to test whether the IP address is valid. Blocking
pings provides some extra security from hackers.
Click Accept to save the settings or Cancel to discard changes.
Dynamic IP
Dynamic IP addressing assigns a different IP
address each time a device connects to an ISP
service provider. The service is most commonly
used by ISP cable providers.
Account Name
Enter the account name provided
by your ISP.
Domain Name
Enter the domain name provided
by your ISP.
MTU
The maximum transmission unit (MTU)
specifies the largest packet size permitted for an
internet transmission. The factory default MTU size
for Dynamic IP is 1500. The MTU size can be set
between 576 and 1500.
Get Automatically From ISP
Use These DNS Servers
Click the radio button to set up the Primary DNS and Secondary DNS servers manually.
Discard Ping on WAN
Check to Enable to recognize pings on the ENS202 WAN interface or Disable to block pings on the ENS202
WAN interface. Note: Pinging IP addresses is a common method used by hackers to test whether the IP address is valid. Blocking
pings provides some extra security from hackers.
Click Accept to save the settings or Cancel to discard changes.
Click the radio button to obtain the DNS automatically from the DHCP server.
4-13
D
IP
YNAMIC
Advertisement
Table of Contents
