Product Layout - EnGenius User Guide User Manual

P O
RODUCT VERVIEW

1.3 Product Layout

A B C
Figure 1-1: Back Panel View
D
BACK PANEL VIEW
A Power LED
B LAN (2) LEDs
C WLAN LED
D Signal Indicator LED
1-5
P
RODUCT
DESCRIPTION
OFF = ENS202 is not receiving power
ON = ENS202 is receiving power
OFF = ENS202 is not connected to the
network.
ON = ENS202 is connected to the network,
but not sending or receiving data
Blink = ENS202 is sending or receiving data
(Access Point or Client Bridge Mode)
OFF = ENS202 radio is off and the device is
not sending or receiving data over the
wireless LAN.
ON = ENS202 radio is on, and the device is
not sending or receiving data over the
wireless LAN.
Blinking = ENS202 radio is on, and the
device is sending or receiving data over the
wireless LAN.
(Client Bridge, WDS Station and Client
Router Mode)
Green - Signal is good
Orange - Signal is normal
Red - Signal is weak or non-existent
L
AYOUT