Configuring Diagnostics - EnGenius ENS202EXT User Manual

B N S
ASIC ETWORK ETTINGS

4.5.10 Configuring Diagnostics

The diagnosis feature allow the administrator to verify that another device is available on the network and is accepting request pack-
ets. If the ping result returns alive, it means a device is on line. This feature does not work if the target device is behind a firewall or
has security software installed.
Target IP / Domain Name
to search.
Ping Packet Size Enter the packet size of each ping.
Number of Pings Enter the number of times you want to ping.
Start Ping Click Start Ping to begin pinging.
Trace route target Enter an IP address or domain name you
want to trace.
Start Traceroute Click Start Traceroute to begin the
traceroute operation.
Target Address Enter the IP address of the target PC.
Time period Enter time period for the speed test.
Check Interval Enter the interval for the speed test.
Start Speed Test Click Start Speed Test to begin the speed
test operation.
IPv4 Port Displays the IPv4 port number of the ENS202EXT.
IPv6 Port Displays the IPv6 port number of the ENS202EXT.
Enter the IP address you would like
4-52
C D
ONFIGURING IAGNOSTICS