System Setup; Configuring Operation Mode - EnGenius User Guide User Manual

B N S S S
ASIC ETWORK ETTINGS YSTEM ETUP

4.2 System Setup

The following sections explain the features and functionality of the ENS202 in access point mode, client bridge mode, WDS access
point mode, WDS bridge mode, WDS station mode and client router mode.

4.2.1 Configuring Operation Mode

Set the primary function of the device. The function that is selected affects which items are available in the main menu.
Device Name Enter a name for the device. The name you type
appears in SNMP management. This name is not the SSID and
is not broadcast to other devices.
Country/Region Select a Country/Region to conform to local
regulations.
Operation Mode Use the radio button to select an operating
mode.
Click Save & Apply to save changes or Cancel to abort.
4-9