B
N
S
ASIC
ETWORK
ETTINGS
4.4 Configuring Wireless LAN
4.4.1 Configuring Wireless Settings
Instructions on how to configure the wireless and security settings for each of the possible operating modes.
WARNING!
!
Incorrectly changing these settings may cause the device to stop functioning. Do not modify the settings in this section without a thor-
ough understanding of the parameters.
Access Point Mode
The ENS202 supports Access Point Mode. In this mode, users with a wireless client device within range can connect to the ENS202
to access the WLAN.
Wireless Mode
Wireless mode supports 802.11b/
g/n mixed modes.
Channel HT Mode
The default channel bandwidth
is 20/40 MHz. The larger the channel, the better
the transmission quality and speed.
Extension Channel
Select upper or lower
channel. Your selection may affect the Auto
channel function.
Channel / Frequency
Select the channel and
frequency appropriate for your country's
regulation.
Auto
Check this option to enable auto-channel selection.
4-22
C
W
LAN
ONFIGURING
IRELESS