B
N
S
ASIC
ETWORK
ETTINGS
4.4 Configuring Wireless LAN
4.4.1 Configuring Wireless Settings
Instructions on how to configure the wireless and security settings for each of the possible operating modes.
!
WARNING!
Incorrectly changing these settings may cause the device to stop functioning. Do not modify the settings in this section without a thor-
ough understanding of the parameters.
Access Point Mode
The ENS202 supports Access Point Mode. In this mode, users with a wireless client device within range can connect to the ENS202
to access the WLAN.
Wireless mode supports 802.11b/
Wireless Mode
g/n mixed modes.
The default channel bandwidth
Channel HT Mode
is 20/40 MHz. The larger the channel, the better
the transmission quality and speed.
Select upper or lower
Extension Channel
channel. Your selection may affect the Auto
channel function.
Select the channel and
Channel / Frequency
frequency appropriate for your country's
regulation.
Check this option to enable auto-channel selection.
Auto
4-22
C
W
LAN
ONFIGURING
IRELESS