Configuring Wireless Lan; Configuring Wireless Settings; Access Point Mode - EnGenius ENS500EXT User Manual

B N S
ASIC ETWORK ETTINGS

4.4 Configuring Wireless LAN

4.4.1 Configuring Wireless Settings

Instructions on how to configure the wireless and security settings for each of the possible operating modes.
WARNING!
!
Incorrectly changing these settings may cause the device to stop functioning. Do not modify the settings in this section without a thor-
ough understanding of the parameters.

Access Point Mode

The ENS500EXT supports Access Point Mode. In this mode, users with a wireless client device within range can connect to the
ENS500EXT to access the WLAN.
Wireless Mode Wireless mode supports 802.11a/n
mixed modes.
Channel HT Mode The default channel bandwidth is 40
MHz. The larger the channel, the better the transmission
quality and speed.
Extension Channel Select upper or lower channel. Your
selection may affect the Auto channel function.
Channel / Frequency Select the channel and frequency
appropriate for your country's regulation.
Auto Check this option to enable auto-channel selection.
AP Detection AP Detection can select the best channel
to use by scanning nearby areas for Access Points.
4-22
C W LAN
ONFIGURING IRELESS